Title:		wpa_supplicant.tcz
Description:	wpa_supplicant - Wi-Fi Protected Access supplicant
Version:	2.0
Author:		Jouni Malinen
Original-site:	http://hostap.epitest.fi/wpa_supplicant
Copying-policy:	GPLv2 (see /usr/local/share/doc/License/wpa_supplicant-copying.txt)
Size:		268K
Extension_by:	gutmensch
Tags:		wireless wpa protection access provider supplicant wpa_supplicant
Comments:	wpa_supplicant tools for Tiny Core Linux

		GUI Interface:	
		Load wpa_gui.tcz, open ControlPanel => Services and activate wpa_gui, then
		start wpa_gui application from wbar and configure your wireless network.
		After setting up your wireless network, choose "File -> Save Configuration" 
		and put etc/wpa_gui.conf to your backup. On next boot, with wpa_gui.tcz loaded
		it should automatically reconnect to your wireless network (without having the
		need of starting wpa_gui again), when you put "/usr/local/etc/init.d/wpa_gui start"
		to your bootlocal.sh.

		Cmd line usage:
		$ sudo su
		$ wpa_passphrase YourSSID YourPassword > /etc/wpa_supplicant.conf
		$ wpa_supplicant -Dwext -iwlan0 -c/etc/wpa_supplicant.conf -B
		$ udhcpc -b -i wlan0 -h box -p /var/run/udhcpc.wlan0.pid
		
		Information:
		Being connected to ethernet _and_ wireless with two DHCP client processes can
		lead to problems like slow connections. As a solution setup a static IP address
		on one of the devices.

		IMPORTANT: 
		You will most probably need firmware*.tcz extensions to use your wireless device!
		Since there are lot of them like firmware-atheros, firmware, firmware-iwlwifi,
		please check which vendor firmware belongs to your device.
	   	--- 
		This extension is PPI compatible.
Change-log:	2008/12/01	Initial version 0.5.11 by dmoerner
		2009/08/08	Bump to 0.6.9 by Juanito, fixed corrupted tcz by ^thehatsrule^
		2011/06/17	Bump to 0.7.3
		2011/06/28	Removed startup script
		2011/12/05	Recompiled against openssl 1.0.0 and recompiled wpa_gui
		2011/12/07	Added init script to ease the use of wpa_gui
		2012/05/30	Bump to 1.0, support new libnl-3
		2012/06/05	Updated wpa_gui init script to avoid multiple instances of udhcpc
Current:	2013/04/14	Bump to 2.0